Publish Time: 2024-11-04 Origin: Site
As a daily oral care product, oral liquid has multiple functions, mainly including cleaning the mouth, reducing bacteria, preventing oral diseases and improving breath. It contains a variety of active ingredients, such as antibacterial agents, fluoride, natural extracts, etc., which can effectively help reduce the formation of dental plaque and prevent caries and gingivitis. In addition, mouthwash can also help remove food residues and soft deposits in the mouth, reduce oral odor, and provide fresh breath. For some mouthwashes containing fluoride, they can also help strengthen tooth enamel and prevent tooth decay. For mouthwashes containing natural extracts, they may have anti-inflammatory and soothing effects on oral mucosa. In general, mouthwash is an important auxiliary tool for maintaining oral health. It helps improve the oral environment and improve oral health through chemical or physical effects.
When choosing raw materials for mouthwash production, multiple factors need to be considered to ensure the safety, effectiveness and consumer experience of the product.
Safety and toxicological evaluation: All raw materials used in mouthwash should comply with the requirements of national laws, regulations and industry standards, and each raw material should be fully toxicologically evaluated. Safety evaluation should take into account the physical and chemical indicators of the raw materials and be carried out in four steps: hazard identification, dose-effect evaluation, exposure assessment, and risk characterization.
Selection of functional ingredients: The functional ingredients of mouthwash include solvents, flavors, preservatives, antibacterial agents, etc. For example, commonly used solvents are glycerol, propylene glycol, and ethanol; antibacterial agents such as cetylpyridinium chloride, chlorhexidine gluconate, and benzalkonium chloride. The selection of these ingredients should be based on their specific role in oral care, such as antibacterial, anti-inflammatory, and plaque reduction.
pH regulator: The pH value of oral cleaning and care solution should be between 3.0-10.5, and for products with a pH value below 5.5, data on the safety of oral hard tissues should be provided. The oral pH value of healthy people fluctuates between 5.5 and 7.5. Therefore, mouthwash with a pH value in the range of 5.5 to 8 is a mild product.
Taste and acceptance: Consumers have specific preferences for the taste and smell of mouthwash. Therefore, when choosing flavors and sweeteners, consider whether they can provide a fresh taste and pleasant smell without causing irritation or discomfort. For example, mint flavors are widely used because of their freshness.
Natural ingredients and traditional formulas: More and more consumers tend to choose products containing natural ingredients. Therefore, consider adding traditional ingredients such as clove essence, peony bark, and monk fruit, which can not only provide herbal aroma, but also have antibacterial and oral environment improvement effects.
Alcohol-free formula: Considering that some consumers are sensitive to alcohol or seek milder products, alcohol-free formula mouthwashes are becoming more and more popular. Alcohol-free mouthwash can reduce oral irritation and provide a more comfortable use experience.
Application of special ingredients: Some mouthwashes may contain special ingredients such as probiotics, New Zealand manuka honey, mint leaf oil, etc., which can provide additional oral health benefits, such as physical removal of bad breath bacteria, providing a probiotic environment, etc.
The mouthwash production process is a technical process involving multiple steps, starting from reverse osmosis water treatment to produce pure water, to mixing, and finally filling the mouthwash.
First, the production of mouthwash begins with reverse osmosis water treatment. Reverse osmosis (RO) water treatment technology is a membrane separation technology that uses the selective permeability of a semipermeable membrane and pressure as a driving force. In this process, the operating pressure applied on the inlet side is greater than the osmotic pressure of the inlet solution, so that water molecules continuously pass through the membrane and flow into the central tube through the water production channel, while impurities in the water such as ions, organic matter, bacteria, viruses, etc. are retained on the inlet side of the membrane and then flow out at the concentrated water outlet, thereby achieving the purpose of separation and purification. Reverse osmosis equipment can block all soluble salts and organic matter with a molecular weight greater than 100, but allows water molecules to pass through. The desalination rate of the reverse osmosis composite membrane is generally greater than 98%. This step ensures the purity of the water quality of mouthwash production and provides high-quality pure water for subsequent production links.
The next step is the mixing link. The raw materials of mouthwash include water, alcohol, glycerin, zinc oxide, sodium chloride, etc. These raw materials need to undergo rigorous inspection and screening to ensure that their quality meets relevant standards. During the formulation process, the prepared raw materials are mixed in a certain proportion according to the product requirements and formula table. Different formulas will bring different tastes and functions, such as cleaning the mouth, sterilizing and disinfecting, and inhibiting bad breath. During the mixing process, the formulated raw materials are placed in a mixing tank and fully mixed by stirring or high-speed stirring equipment. The time and method of mixing will have an important impact on the quality of the product and need to be adjusted according to the specific formula and process requirements. The mixed mouthwash should have a uniform color and texture, without obvious suspended matter or sediment.
The last step is the filling of the mouthwash. Filling is the last step in the production of mouthwash, which requires precise and hygienic operations to ensure the stability and safety of the product. The filling production line usually includes automatic bottle filling machines for mouthwash, which can accurately fill mouthwash into containers of various specifications. After filling, the mouthwash needs to be sealed and packaged to ensure the sealing of the product and facilitate transportation and sales.
Customer-centered service concept: IMMAY adheres to the business philosophy of "customer-centered, quality-centered, and professional-oriented", and is committed to achieving "quality first, service-oriented, and technology-leading". This means that IMMAY always puts customer needs first when providing mouthwash production equipment, ensuring that the equipment meets your specific requirements and provides high-quality products and services.
High quality products: IMMAY's mouthwash production equipment is known for its high quality and stability. Our equipment is made of high quality materials to ensure corrosion resistance and durability, reduce maintenance costs, and improve production efficiency.
Advanced technology: IMMAY is constantly pursuing technological innovation, and our equipment uses the latest technology to ensure the efficiency and stability of the production process. This includes precise filling technology that enables precise metering; the most efficient mixing technology that enables uniform mixing.
Customized solutions: IMMAY provides you with customized production line equipment to meet the specific needs of different customers. Whether it is production process, daily production volume or packaging container, IMMAY's equipment can be designed and produced according to your requirements.
Adaptability to market trends: With the development of the mouthwash market, consumers have an increased demand for mouthwash with specific functions and natural ingredients. IMMAY's equipment is able to adapt to market trends and produce mouthwash products that meet the diverse needs of consumers.
If you are interested in IMMAY's mouthwash production equipment and want to know more information, including price and purchase channels, you can contact IMMAY in the following ways:
Whatsapp: 0086-18936474568
Email: sales@immay-auto.com